TM Floor Scarifier Petrol GX240

TM Floor Scarifier Petrol GX240
Weight: 180KG
Product Description: 8.5HP Petrol V-belt driven.
Application: Removing old concrete, layers of paint, caked oil, grease, traffic lane markings,chemical spillages, rust scale, encrustations and irregularities/ thermoplastics. Roughening: concrete floors for resurfacing and better adhesion of new flooring materials, slick roads for greater safety.
Safety: This product should not be operated unless proper training has been supplied to the person operating the equipment.Personal protection gear includes: goggels, steel-cap boots, gloves, ear plugs, dust mask, hard-hat.
Starting:
  • Turn petrol on
  • Open choke (butterfly closes to close off air flow)
  • Pull recoil 1/3 of way twice
  • Pull recoil full way until starts (usually 2 pulls)
  • Close choke (butterfly opens the air flow) 
Running machine: Check air filters at least twice a day- very dusty application. Check oils daily. Care must be taken to set the machine to the correct height-too low and the machine will jump and be unstable-too high and it is innefective. Check for wear on the flails-replace to improve output of the machine.
Do's and Donts: Keep your hands and feet away from front of machine while in operation. 
Shutting Down: Turn On/Off switch off. Close  fuel line.
Re-fueling:
  • Ensure petrol switch is off before refuelling.
  • Machine may not be running whilst refueling.
  • Do not smoke or use a cell phone whilst refueling.
  • Remove fuel cap and place in clean dry area within reach of the machine.
  • Pour the fuel into the tank.
  • Replace fuel cap and move fuel container.
  • Do not place any plastice bags around the fuel cap as this will close the breather hole in the cap. 

 

Maintanance Checklist:

NA

Testing Equipment Before Hire:

  • The equipment must be clean and must have a service tag attached to ensure that the workshop completed the standard service before returning the asset to the floor.
  • The equipment must be taken to the testing station applicable where you will test the machine in front of the customer whislt demonstrating the operation of the asset to the customer.
  • Ensure that the required safety attire is worn before beginning the equipment test and instruction to the customer and ensure that the customer is in a safe location.
  • Start the equipment as per the above instruction.
  • Demonstrate the operation of the equipment as per the operating instructions above.
  • Shut the equipment down.
  • The customer must sign that he has recieved training. 
Enquiry about this product