Mayday Floor Grinder Electric

Mayday Floor Grinder Electric
Weight: 102KG
Product Description: -
Application: This machine is used for grinding concrete floors (dry process). It is for removing laitance, paint, grease, etc. It can be used for grinding down construction joints to neaten the finish.
Safety: This product should not be operated unless proper training has been supplied to the person operating the equipment.Personal protection gear includes: goggels, steel-cap boots, gloves, ear plugs, dust mask, hard-hat.
Starting: -
Running machine: Make sure when starting the machine the grinding blocks are raised off the grinding surface. Make sure the wedges are put in correctly before starting the machine (the blocks will be flung out of their correct positions immediatly when the machine starts up if this is not done).
Do's and Donts: The correct diameter cable must be used when the motor is electric to avoid a voltage drop. Makes sure that in the case where the machine is driven by a petrol engine, that ventilation is adequate.
Shutting Down: Turn On/Off switch off.
Re-fueling: NA

 

Maintanance Checklist:

a. Clean machine
b. Check lead and plug
c. Listen for bearing noises
d. Check block holders 

Testing Equipment Before Hire:

The equipment must be clean and must have a service tag attached to ensure that the workshop completed the standard service before returning the asset to the floor.
The equipment must be taken to the testing station applicable where you will test the machine in front of the customer whislt demonstrating the operation of the asset to the customer.
Ensure that the required safety attire is worn before beginning the equipment test and instruction to the customer and ensure that the customer is in a safe location.
Start the equipment as per the above instruction.
Demonstrate the operation of the equipment as per the operating instructions above.
Shut the equipment down.
The customer must sign that he has recieved training. 

Enquiry about this product