080 TOOLHIRE | 080 8665 4473
|Application:||Finish polishing of woodwork surfaces. Sanding surfaces of woodwork or sheet metal prior to painting.|
|Safety:||This product should not be operated unless proper training has been supplied to the person operating the equipment.Personal protection gear includes: goggles, steel-cap boots, gloves, ear plugs, dust mask, hard-hat.|
|Running machine:||Sanding paper must be fitted tightly. Lightly press sander against surface and move sander forward and backwards at a constant speed. Remove all metal objects like nails from surface. Dust bag must be emptied when full. Use a proper extension cord.|
|Do's and Donts:||Ensure the power source delivers between 220 to 230V. Ensure power cord extension/ machine do not get wet. Do not Apply excessive pressure. Allow 5 minutes for the machine to cool off every 15-20 minutes of use. Use both hands to maintain control of the machine|
a. Strip and clean out dust
b. Check/replace all bearings
c. Check/clean armature
d. Check/clean field coil
e. Check/clean switch
f. Check drive belt
g. Check/replace electric cord and plug
h. Check/replace brushes
i. Check brush holders
j. Check rubber pad for damages
The equipment must be clean and must have a service tag attached to ensure that the workshop completed the standard service before returning the asset to the floor.
The equipment must be taken to the testing station applicable where you will test the machine in front of the customer whislt demonstrating the operation of the asset to the customer.
Ensure that the required safety attire is worn before beginning the equipment test and instruction to the customer and ensure that the customer is in a safe location.
Start the equipment as per the above instruction.
Demonstrate the operation of the equipment as per the operating instructions above.
Shut the equipment down.
The customer must sign that he has recieved training.