080 TOOLHIRE | 080 8665 4473
|Application:||Cutting or cutting out shapes in various types of wood work pieces, Cutting various metals such as mild steel, aluminium and copper. Cutting sythetic resin materials such as bakelite and Vinyl Chloride. Cutting various decorative sheets and thin and soft construction materials.|
|Safety:||This product should not be operated unless proper training has been supplied to the person operating the equipment.Personal protection gear includes: goggles, steel-cap boots, gloves, ear plugs, dust mask, hard-hat.|
|Running machine:||Use the correct blade for the material you are working with. Decrease orbital operation for all soft materials and increase for hard meterials by setting the button on the side of the machine to "O" for soft materials. By utelising weight of machine, moderatly proceed without using too much force. When cutting wood ensure that all nails and staples are removed. Use a proper extension cord.|
|Do's and Donts:||Ensure the power source delivers between 220 to 230V. Ensure power cord extension/ machine do not get wet. Do not Apply excessive pressure. Allow 5 minutes for the machine to cool off every 15-20 minutes of use.|
a. Strip machine and clean out dust
b. Check/replace all bearings
c. Check and clean armature
d. Check and clean field coil
e. Check for wear on moving parts and gears
f. Check grub screws, make sure that it's not stripped
g. Check/replace brushes
h. Check brush holder
i. Check electric cord and plug for damages – replace if necessary
j. Clean and tighten all connections on switch
The equipment must be clean and must have a service tag attached to ensure that the workshop completed the standard service before returning the asset to the floor.
The equipment must be taken to the testing station applicable where you will test the machine in front of the customer whislt demonstrating the operation of the asset to the customer.
Ensure that the required safety attire is worn before beginning the equipment test and instruction to the customer and ensure that the customer is in a safe location.
Start the equipment as per the above instruction.
Demonstrate the operation of the equipment as per the operating instructions above.
Shut the equipment down.
The customer must sign that he has recieved training.